LC Clients

• Barrier P/N 50000021 R3 (To be used to limit power to the HY-ALERTA Model 1600 Series and HYOPTIMA Model 1700 Series covered in Part B of this report to an intrinsically safe level)
• CSA Standard Ratings: [Ex ib] IIC Gb
• UL Standard Ratings: Class I Zone 1 [AEx ib] IIC Gb
  • Um = 250 V,
  • Uo = 11.5 Vdc
  • Io = 3.27 Adc
  • Po = 9.41 W
  • Ci = 0
  • Li = 0
  • Co = 1.64uF
  • Lo = 3.3uH
  • Lo/Ro = 29 uH/ohms
• Process Monitor HY-ALERTA Model 1600 Series & Process Monitor HY-OPTIMA Model 1700 Series (to be used with associated IS Shunt Safety Assembly)
• CSA Standard Ratings: Ex ia II H2, d+d IIB T3 Ga and Ex ib II H2, ib d IIB T3 Gb
• UL Standard Ratings: Class I Zone 0 AEx ia II H2, d+d IIB T3 Ga and Class I Zone 1 AEx ib II H2, ib d IIB T3 Gb
• J1 Pins 2 & 3 (power supply)
  • Ui = 11.5 V
  • Ii = 3.27 A
  • Pi = 9.41 W
• The equivalent parameters are:
  • CI = 0
  • LI = 0
• J1 Pins 4 & 5 (4-20 mA loop)
  • UI = 26.7 V
  • Ii = 91 mA
  • Pi = 0.611 W
• The equivalent parameters are:
  • CI = 68.2 nF
  • LI = 0
• J2 Pins 1 & 2 and 3 & 4 (Rx and Tx)
  • UI = 3.7 V
  • Ii = 225 mA
  • Pi = 206 mW
• The equivalent parameters are:
  • CI = 0
  • LI = 0
  • Uo = 5.9 V
  • Io = 238 mA
  • Po = 0.35 W
  • Co = 1000 uF
  • Lo = 2.5 mH
  • Lo/Ro = 404 uH/ohms

• CAN/CSA-E60079-11:2011
• UL 60079-11(Ed.6): 2013

• None

General Note:

• Project no.: 12618
• LC Listing Report no.: 9001-1S_Rev.3
• LC Certificate no.: 9001-1S_Rev.3