LC Clients

• Small XP control panel starters
• Model Number: 14409A
• Ratings:
  • 230 Vac, 3 Phase, 40 Amps, 60Hz
  • Class I, Division 1, Group D, T3
  • -40C<Tamb<+40C

Serial no.:

• UL 1203
• UL 508A*

*UL 508A compliance was accepted from the QPS evaluation report number LPS1945-1

• All unused device openings must be fitted with a certified close-up plug
• All cable glands used in the device must be of certified Class I, Division 1 cable glands.
• The end user is to ensure appropriate earthing upon installation
• Power input and output (I/O) wiring shall be accordance with Class 1, Division 1 wiring method per the National Electrical Code (NFPA 70) for installation within U.S
• Final acceptance of this equipment when installed is subject to the jurisdiction of the local inspection authority
• Cables must be effectively clamped to prevent pulling or twisting
• Customer will be responsible to maintain the temperature inside the explosion proof chamber above -20°C
• The enclosure shall not be open when the explosive atmosphere is present

General Note:

• Project no.: T-22405
• LC Unit Verification Report no.: 11.03.22405-1_Rev.0
• LC Unit Verification Certificate no.: LC22405-1