LC Clients

• AC induction motor
• Model No.: WL381060VSSSPAE
• Rating:
  • Ex eb II T3
  • IP23
  • -20 °C ≤ Tamb ≤ +55 °C
  • 600V, 50Hz, 3 phase, 510A, 986rpm, 550 HP

Serial Nos.:

• 0101M122341
• 0102M122343
• 201M128243-A

• EN 60079-0:2018
• EN 60079-7:2015/A1:2018

• The motor shall be supplied with min 2000 scfm of cooling air at the inlet.
• The following drives may be used: Omron model OTDC66081 and NOV model ACS800-104-0580-7 both rated to a maximum of 1300A.
• RTD or thermostat devices shall be supplied from a suitably certified intrinsically safe source and set at 170^oC max.
• Anti condensation heaters can be fitted to the endshields but must be Ex d IIC T3 II GD certified (certificate No. PTB 02ATEX1116X). Rated 50/80W at 110/265V.
• A suitably certified brake at the non-drive end or a fitted steel guard which protects the top of the motor is required.
• Loose flying leads may be three different types; 313 rated at 125^oC; 373 or 444 rated at 110^oC.

General Note:

• Project no.: LV-16103D
• ATEX Unit Verification Report no.: 11.02.16103-1_Rev.D
• ATEX CAT 3 Unit Verification Certificate no.: LC23ATEX16103(X), Issue 2