LC Clients

• In-Line Data Module (IDM)
• Model nos.: VIDM-150EX, VIDM-151EX, UIDM-450EX, UIDM-451EX
  

  Brand	IDM-	X5	X	EX
  V: Very High Frequency U: Ultra High Frequency	In-line Data Module	Where X: Represents the product line: 1: smartcom150 4: smartcom450	0:TRUB (Tag reader UHF board)   1:RS-485	ATEX/IECEx

• Ratings:
  • Exia I Ma
  • Ta: -20°C to +40°C

• EN IEC 60079-0:2018
• EN 60079-11:2012

1. Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure of this equipment may generate an ignition-capable level of electrostatic charge. Therefore, the equipment shall not be installed in a location where the external conditions are conducive to the build-up of electrostatic charge on such surfaces. In addition, the equipment shall only be cleaned with a damp cloth.
2. The equipment is an intrinsically safe device and must be powered by a suitably certified intrinsically safe power source provided in the end-use application. It features both input and output entity parameters, allowing it to be connected to multiple devices in a daisy-chain configuration. An intrinsically safe system loop calculation must be performed to verify that the total capacitance and inductance of all connected devices—including contributions from the connecting cables—do not exceed the entity parameter limits of the associated safety barrier, as required in the final application detailed below:
   • The external circuit contains no combined lumped inductance Li and capacitance Ci greater than 1% of the listed values. or
   • The external circuit contains only lumped inductance or only lumped capacitance in combination with a cable and not greater than 50% of the listed values.
3. The equipment must be supplied by only one suitably intrinsically safe apparatus at any time.

General Note:

• Project no.: T-22283
• ATEX Test Report Cover no.: 11.02.22283-1_Rev.0
• ATEX EU Type Certificate no.: LC24ATEX22283-1X, Issue0