LC Clients

Certification Record

LC1250578
Scantech International Pty. Ltd
2025-09-12
South Australia
Australia
CS2100
29.260.20, 19.080, 71.040.10
  • COALSCAN Ash Analyzer
  • Model No.: CS2100
  • Ratings:
    • Ex tc IIIB T60°C Dc
    • Zone 22 AEx tc IIIB T60°C Dc
    • Ta: -20°C to +40°C
    • IP5X
    • 110Vac 4A or 240Vac 2A ,1PH, 60Hz, 440W

Serial No.:

Product Serial No. LabTest Label No.
5369 LC-20131
  • CSA C22.2 No. 60079-0:19
  • CSA C22.2 No. 60079-31:15
  • UL 60079-0 Edition 7
  • UL 60079-31 Edition 2
  • CSA-C22.2 No. 61010-1-12:2012 (R2017)
  • UL 61010-1 (Edition 3)
  1. Wiring shall be accordance with wiring method per the Canadian Electrical Code (CEC) for installation in Canada and per the National Electrical Code (NFPA 70) for installation within U.S.
  2. When cable glands or plugging connections are used their IP and Type rating must meet the installation requirements of CEC, Section 18, and NEC, Section 500 for installation in Zone and Division for methods of protection ‘Ex t’ and ‘Class II / Class III’.
  3. End-user shall ensure the device is properly connected to Earth upon installation.
  4. Electrostatic charging especially by the process shall be avoided.
  5. Final acceptance of this equipment when installed is subject to the jurisdiction of the local inspection authority.

General Note:

  • Project no.: 25-1091
  • LC Unit Verification Report no.: 11.00.25-1091-1_Rev.0
  • LC Unit Verification Certificate no.: LC25CA25-1091-1
Go to Top