LC Clients

• Explosion Proof Starter Panel
• Model Number: 14438A,14438B
• Ratings
  • 230 Vac, 3 Phase, 15 Amps, 60Hz
  • Class I, Division 1, Group D, T3
  • -40°C to +35°C

Serial Nos.:

• CSA C22.2 No. 30:20
• CSA C22.2 No. 286:17*

*Compliance was accepted from the QPS evaluation report number LPS124-1

• All unused device openings must be fitted with a certified close-up plug.
• All cable glands used in the device must be of certified Class I, Division 1 cable glands.
• The end user is to ensure appropriate earthing upon installation.
• Power input and output (I/O) wiring shall be accordance with Class 1, Division 1 wiring method per the Canadian Electrical Code for installation within Canada.
• Final acceptance of this equipment when installed is subject to the jurisdiction of the local inspection authority.
• Cables must be effectively clamped to prevent pulling or twisting.
• Customers will be responsible for maintaining the temperature inside the explosion proof chamber above -20°C.
• The enclosure shall not be open when the explosive atmosphere is present.

General Note:

• Project no.: 25-1319
• LC Unit Verification Report no.: 11.03.25.1319-1_Rev.0
• LC Unit Verification Certificate no.: LC25-1319-1