LC Clients

• Control Panel
• Model No.: MTR6813
• Ratings:
  • 460V, 3PH, 60A, 60Hz
  • Control Voltage 24VDC
  • Class I, Division 2, Group D; T3

• Disconnect Switch
• Model No.: MTR6313
• Ratings:
  • 460V 3PH, 60A, 60Hz
  • Class I, Division 1, Group D; T3
  • Ta: -20°C to +50°C

Serial No.:

• UL 508A 3^rd Edition
• UL 121201 9^th Edition
• UL 1203 5^th Edition

• Control Panel and Disconnect Switch can be installed in a hazardous location according to their HazLoc ratings.
• The ½ inch NPT plug must be fully engaged with min. 5 threads
• Installation manual to be provided to the customer by the manufacturer.
• All the cable gland installed must be appropriate as per the critical component list (Explosion proof).
• Enclosure must be installed as per the requirements of installation instructions provided by the manufacturer.
• All unused device openings must be fitted with a certified close-up plug.
• The end user is to ensure appropriate earthing upon installation.
• Power input and output (I/O) wiring shall be accordance with Class I, Division 2 wiring method per the National Electrical Code (NFPA 70) for installation within U.S.
• Final acceptance of this equipment when installed is subject to the jurisdiction of the local inspection authority.
• Cables must be effectively clamped to prevent pulling or twisting.
• The enclosure shall not be open when explosive atmosphere is present.
• The RJ45 connector should not be used when explosive atmosphere is present.

General Note:

• Project no.: 25-1403
• LC Unit Verification Report no.: 11.03.25-1403-1_Rev.0
• LC Unit Verification Certificate no.: LC25-1403-1