Certification Record
LC 1228413
Exeltech
2015-04-08
Texas
United States
MX System and MX Stack System Components
29.240.30
Modular Inverter System Components
Model/Ratings:
MX System and MX Stack System Components:
• Rated (nominal) input voltages: 12(13.4), 24(27.6), 32(36.8), 48(55.2), 66(75.9), 108(124) VDC
• Rated output per MX Power Module: 117VAC, 8.5Amps, 1000Watts, 50/60Hz
• Rated output per MX Power Module: 117VAC, 8.5Amps, 1000Watts, 50/60Hz
· Included Recognized Components: MX System, MX Stack System, MX Cage, MX Alarm Card and MX Transfer Switch, MX Control Card, MX System Monitor II, and MX Power Module.
Model Number designations per recognized components are as follows:
MX Cage Part Number
Model Number: MX (A) (B)–(C)–(D)–(E)–(F)–(J)(J)
(A) = Cage Size: 1=19" ; 2=23"
(B) = Cage Type: A=A-Cage ; B=B-Cage (expansion)
(C) = AC Voltage(*) ; Not AC Dependent
(D) = DC Voltage (*) ; Not DC Dependent
(E) = Frequency (*) ; Not Frequency Dependent
(F) = Revision Level: For Exeltech Use only
(J) = Option Code:
- 60 – 16" BP in 19" Cage 3.2" Accessory
- 60 – 19" BP in 23" Cage 3.2" Accessory
- 82 – 16" BP in 19" Cage 2.8" Accessory
- 89 – 16" BP in 23" Cage 6.4" Accessory
Example:
- 23" A-Cage = MX2A-*-*-*-2
MX ALM/XFR Part Number 117VAC Only
Model Number: MX*-(A)–(D)–(E)–(F)–(J)(J)
(A) = Card Type: A=Alarm Card ; X=Mechanical Transfer SW ; W=Bi-Phase Transfer SW
(D) = DC Voltage (*) ; Not DC Dependent
(E) = Frequency (*) ; Not Frequency Dependent
(F) = Revision Level: For Exeltech Use only
(J) = Option Code:
Transfer SW
- 02 – Conformal Coating
- 03 – 20 Amp Breaker
Alarm Card
- 02 – No Output Breaker
- 11 – No Output Breaker + Conformal Coating
- 20 – Conformal Coating
Example:
- Alarm Card = MX*-A-*-*-4-02
- Transfer SW = MX*-X-*-*-2
MX Control Card Part Number 117VAC Only
Model Number: MX*-C–(D)–(E)–(F)–(J)(J)
(C) = Card Type: Control Card
(D) = DC Voltage: 1=12V ; 2=24V ; 3=32V ; 4=48V ; E=66V ; I=108V
(E) = Frequency: 5=50Hz ; 6=60Hz ; 1=100Hz ; 4=400Hz
(F) = Revision Level: For Exeltech Use only
(J) = Option Code:
- 01 – Phase 2 or Phase 3 Control Card
- 07 – Conformal Coating
- 08 – Phase 2 or Phase 3 Control Card with Conformal Coating
Example:
Control Card = MX*-C-4-6-1
CSA C22.2 NO. 107.1-01 (R2011) – General Use Power Supplies
UL 1778: 2014 (Ed. 5) – Uninterruptible Power Systems
Indoor Use Only
Listed as a component of other Listed equipment where the suitability of the combination is to be determined by the Authority Having Jurisdiction.
