Clients

• Pressure Transmitters
• Model Nos.: Process 4; Process 4 HYD; Process 6; Process 6 HYD; Process 9 – IS; Process 9 – IS – HYD
• Rated:
  • CI D2 Grp ABCD Class I Zone 2
  • AEx ec IIC T4 Gc, Ex ec IIC T4 Gc
  • 10 to 28Vdc, IP65, -40°C to +95°C
  • -30”Hg Vac to 30000 PSI or 1 to 200 PSID
  • 10-28VDC, 5 ma

• CSA C22.2 NO. 213-17/ UL 121201 (Ed 9),
• CSA-C22.2 NO. 61010-1-12 (R2017)/ UL 61010-1 (Ed 3)
• CSA-C22.2 NO. 60079-0:19; CSA-C22.2 NO. 60079-7A;16,
• UL 60079-0 (Ed 7); UL 60079-7 (Ed 5)

1. Installation to be permanently connected, Pollution Degree 4 or better, Overvoltage Category I.
2. Not evaluated for use with flammable fluids.
3. Powered by certified Class 2 Power Supply as defined in the Canadian Electrical Code or National Electrical Code or by a CSA C22.2 No.60950 -1/ UL 60950-1 certified limited power source (LPS).
4. Wiring end must be installed in conduit or other enclosure providing IP65 ingress protection.
5. Models with DIN 43650A connector (nomenclature 22) are limited to Class I and not to be used for Class II applications.
6. Installation must include protection from impact greater than 4 joules.

General Notes:

• Project No. 19352
• Certificate No. LC21CA19352X
• Listing Report No. 11.00.19352-1_Rev0