Measurement, Control & Laboratory Equipment

Testing, Inspection & Certification

LabTest Certification offers accredited testing, inspection, and certification services for Measurement, Control & Laboratory Equipment to ensure compliance with Canadian, U.S., European, U.K., and other international markets. With a broad range of testing services and certifications, we help your products meet industry standards and regulations for safety, performance, and electromagnetic compatibility (EMC).

Essential Standards for Measurement, Control & Laboratory Equipment Certification

At LabTest Certification, we ensure that your products meet the required industry standards for safety, reliability, and performance. The cornerstone for testing Measurement, Control & Laboratory Equipment is the CSA/UL/IEC/EN/AS/NZ 61010-1, a comprehensive standard for electrical safety in laboratory environments. Depending on the specific applications, additional standards may apply, including Electromagnetic Compatibility (EMC) testing standards to ensure your products are free from interference and compliant with international regulations. With our expertise, we guide you through every requirement to ensure global market readiness.

Electrical Safety Testing:

  • IEC 61010-031: Hand-held probe assemblies for electrical measurement & test

  • IEC 61010-1: General electrical safety requirements for laboratory equipment

  • IEC 61010-2-032: Hand-held and hand-manipulated current sensors

  • IEC 61010-2-033: Hand-held and hand-manipulated multimeters and other meters

  • IEC 61010-2-051: Laboratory equipment for mixing and stirring

  • IEC 61010-2-081: Automatic and semi-automatic laboratory equipment

  • IEC 61010-2-010: Laboratory equipment for the heating of materials

  • IEC 61010-2-101: In vitro diagnostic medical equipment

  • EN 61010-2-020: Laboratory centrifuges

  • IEC 61010-2-040: Sterilizers and washer-disinfectors used to treat medical materials

Electromagnetic Compatibility (EMC) Testing

  • EN 61326-1: Electrical equipment for measurement, control, and laboratory use

  • IEC 61326-2-2: Portable test, measuring, and monitoring equipment used in low-voltage distribution systems

  • EN 61326-2-6: In vitro diagnostic medical equipment

  • EN 50270: Electrical apparatus for the detection and measurement of combustible gases, toxic gases, or oxygen

  • IEC 61000-3-2: Harmonic current emissions

  • IEC 61000-3-3: Fluctuations and flickers

LabTest Certification Capabilities

OSHA-Recognized NRTL for Measurement, Control & Laboratory Equipment

As an OSHA-Recognized Nationally Recognized Testing Laboratory (NRTL) for UL 61010-1, LabTest Certification offers accredited testing that ensures your Measurement, Control, and Laboratory Equipment complies with required safety standards. Our NRTL status guarantees that your products meet the required safety protocols recognized across the United States of America. With our expertise in electrical safety and industry-specific certifications, we provide reliable, high-quality testing to streamline your path to market. Trust LabTest to help you navigate the complex regulatory landscape and ensure your equipment’s compliance.

Learn more about OSHA recognition here.

The Benefits of Choosing LabTest Certification

  • Global Market Access: We ensure your products meet the standards for international markets, helping you expand globally.
  • Accredited and Trusted: As an NRTL and accredited by multiple bodies, you can trust us to meet the highest industry standards.

  • End-to-End Solutions: From initial design review to final certification, we offer complete services for product compliance.

Examples of Products We Test

Data Acquisition System DAQ 1
in vitro
Benchtop Oscilloscope
industrial meters
Data Logger
temperature sensor2
multimeter
microscopes
flowmeter 1
centrifuge
questions

Did you know?  Electromagnetic compatibility (EMC) has been a focus since as far back as World War II. During the war, engineers discovered that interference from unshielded equipment could disrupt radar and radio communication—sometimes with critical consequences. Today, EMC requirements are embedded in standards like IEC 61010, ensuring that modern lab and control devices operate safely and reliably even in environments full of electrical noise.

Your Partner in Testing & Compliance

Electromagnetic Compatibility (EMC) Testing

EMC Testing

Pre-Compliance Testing: Early-stage EMC testing to identify potential issues before full compliance testing.

Full Compliance Testing: Full range of EMC tests to ensure your products meet all relevant standards for global markets.

Learn More

Field Evaluations (Worldwide)

Special Inspections

LabTest offers Field Evaluations to ensure your measurement, control, and laboratory equipment meets safety and performance standards globally. We provide Special Inspections like CSA SPE-1000 (Canada), and NFPA 790/791 (USA) for equipment in measurement and control, ensuring your product complies with industry-specific regulations. Our expert team delivers efficient and accurate evaluations, wherever you are.

Learn More

Preliminary Design Review (PDR)

Preliminary Design Review (PDR)

Our Preliminary Design Review identifies potential issues early in the design phase before it’s too late. By addressing concerns up front, we reduce time-to-market and minimize costly revisions. Ensure your design meets critical standards before testing begins.

Learn More

Precision Testing, Reliable Certification – Where Accuracy Meets Efficiency!

    • Ensure Compliance with Minimal Disruption

    • Accelerate Your Product’s Time-to-Market

    • Tailored Testing for Every Industry Need

Get Started Today

We Are Here to Help!

Ready to get your Measurement, Control & Laboratory Equipment certified? At LabTest, our team of experts is committed to helping you navigate the entire certification process, ensuring your products meet the required industry standards. From the initial design review to final approval, we provide personalized support to streamline your certification journey and accelerate your market entry.

Join our community and stay in the loop with LabTest!

Your data will not be shared with 3rd parties and only used to keep you informed on what’s new with LabTest and the industry.