RFQ - EMC - LabTest Certification Inc.

Applicant Information
Company Name*
Website
Address
Street Address City State / Province / Region ZIP / Postal Code Country
Contact Name
Department
Email
Phone
Product Information
Product’s description and intended use/application
Manufacturer
Model Number
Equipment Web Link (if applicable)
Category
- Residential
- Commercial
- Class A
- Class B
- Other - Please Specify
Please Specify
Objective
- EMC
- RED
- FCC
- IC
- Other - Please Specify
Please Specify
Standards
(Please Specify)
Tests
- Pre-compliance
- Full-compliance
- Radiated Emissions Above 1GHz
- Radiated Emissions Below 1 GHz
- Conducted Emissions
- Harmonic Current Emissions
- Electrostatic Discharge
- Voltage Fluctuations and Flicker
- Electrical Fast Transients/Burst
- Surge Immunity
- Radio-Frequency Electromagnetic Field
- Voltage Dips/Interruptions
- Radio Frequency Common Modes
- Power Frequency Magnetic Field Immunity
I/O Ports - Port 1
- AC Power
- DC Power
- Non-Electrical
- Signal I/O Port
- Telecommunication Ports
- Max cable length less than 3m
- Max cable length greater than 3m
- Cable shielded
- Cable unshielded
I/O Ports - Port 2
- AC Power
- DC Power
- Non-Electrical
- Signal I/O Port
- Telecommunication Ports
- Max cable length less than 3m
- Max cable length greater than 3m
- Cable shielded
- Cable unshielded
I/O Ports - Port 3
- AC Power
- DC Power
- Non-Electrical
- Signal I/O Port
- Telecommunication Ports
- Max cable length less than 3m
- Max cable length greater than 3m
- Cable shielded
- Cable unshielded
I/O Ports - Port 4
- AC Power
- DC Power
- Non-Electrical
- Signal I/O Port
- Telecommunication Ports
- Max cable length less than 3m
- Max cable length greater than 3m
- Cable shielded
- Cable unshielded
I/O Ports - Port 5
- AC Power
- DC Power
- Non-Electrical
- Signal I/O Port
- Telecommunication Ports
- Max cable length less than 3m
- Max cable length greater than 3m
- Cable shielded
- Cable unshielded
Test Setup
Electrical Plug
- 2-pin
- 3-pin (with Ground)
- Other - Please Specify
Please Specify
Radio Modem
- None
- Included
Power Requirements
- 120 VAC /60 Hz (FCC)
- 230 VAC /50 Hz (CE)
- Other - Please Specify
Please Specify
Oscillator Requirements
Oscillator #1 - Frequency
Oscillator #1 - Type of Oscillator
Oscillator #2 - Frequency
Oscillator #2 - Type of Oscillator
Oscillator #3 - Frequency
Oscillator #3 - Type of Oscillator
Peripheral and Ancillary Equipment (add more if necessary)
Equipment #1
- Equipment Under Test
- Auxiliary Equipment
- Simulator
Product Type
Manufacturer
Model
Equipment #2
- Equipment Under Test
- Auxiliary Equipment
- Simulator
Product Type
Manufacturer
Model
Equipment #3
- Equipment Under Test
- Auxiliary Equipment
- Simulator
Product Type
Manufacturer
Model
Equipment #4
- Equipment Under Test
- Auxiliary Equipment
- Simulator
Product Type
Manufacturer
Model
File Attachment
This section provides the necessary details for the Equipment Under Test (EUT). Descriptions of the equipment, including software and documentation on installation and operations, should be provided.
Please include any other information necessary for test plan completion. For additional information on how to complete your test plan, please contact LabTest.
The following files for the EUT would be greatly appreciated: Manual, Photos, Schematics and Operating Description.
File
File
File
File
For EU Type Examination certificates, the following three (3) statements must be agreed upon and signed:
- The information above accurately describes, to the best of our knowledge, the scope of the certification sought under the LabTest Product Notification Program.
- We agree to comply with the requirements of the LabTest Product Notification Program and to supply any information needed for the evaluation of our products.
- We confirm that no other applications were submitted to other Notification Bodies (NBs) for this product.
How Did You Hear About Us
Other (please specify)
CAPTCHA

RFQ – EMC

Applicant Information

Product Information

Test Setup

Oscillator Requirements

Peripheral and Ancillary Equipment (add more if necessary)

File Attachment