IT & Audio/Visual Equipment
Testing, Inspection & Certification
Information Technology (IT) and Audio/Visual equipment manufacturers aiming to sell products globally, must go through Safety and Performance testing and certification. Compliance with industry standards requires expertise in Electrical and Mechanical Safety and Electromagnetic Compatibility (EMC).
OSHA-Recognized NRTL
As an OSHA-recognized Nationally Recognized Testing Laboratory (NRTL), LabTest Certification provides product listing services to help manufacturers of Audio/Video and Information and Communication Technology Equipment meet U.S. regulatory requirements.
What is an NRTL?
A Nationally Recognized Testing Laboratory (NRTL) is a private-sector organization that the Occupational Safety and Health Administration (OSHA) has recognized as meeting the legal requirements in 29 CFR 1910.7 to perform testing and certification of products using consensus-based test standards.
Global Market Access for IT & Audio/Video Equipment
In addition to NRTL certification and listing for the United States, LabTest also offers testing, inspection, and certification of IT and Audio/Visual equipment for other international markets like Canada, Europe, the U.K., Australia, New Zealand, and more.
Certified products bearing the LC Certification Mark are products that have met the applicable standards’ requirements and, therefore, are compliant with their intended market regulations.
Prioritizing NRTL certification and product listing through accredited bodies like LabTest Certification helps manufacturers reduce the risks of delays or recalls. This process fulfills regulatory obligations and increases confidence in product safety and compliance.
Which IT and Audio/Visual Products Does LabTest Test & Certify?
LabTest Certification helps ensure IT and AV products meet safety and performance standards for markets worldwide. Whether it’s advanced technology or everyday devices, we work with manufacturers to certify their products, ensuring they are reliable, safe, and market-ready. Our expertise covers a wide range of product categories, such as:
- Computers/Laptops, tablets, smartphones
- Keyboards
- Routers
- Video projectors
- Amplifiers
- Microphones
- Speakers
- Wearable devices
- Digital cameras
- Cell phones
- Electronic musical instruments
- Printers, scanners
- Portable storage devices
- Televisions and monitors
- Security equipment
- Power supplies adapters
- UPS
IT Products — Special Applications
HazLoc
Hazardous Locations
Certified testing for explosive atmospheres, flammable gases, and dust-prone environments.
Marine
Marine Applications
Compliance solutions for shipboard equipment, offshore installations, and harsh marine conditions.
Vehicles
Commercial and Military Vehicles
Testing for durability, electromagnetic compatibility, and extreme environmental conditions.
Aviation
Avionic Applications
Required assessments for airborne electronics, structural integrity, and safety compliance.
SAFETY TESTING
At LabTest, we understand the importance of safety when it comes to IT and AV equipment. Using the unified IEC 62368-1, CSA 62368-1, UL 62368-1, EN 62368-1, BS 62368-1, AS 62368-1, and NZ 62368-1 standard for Audio/Visual (A/V) and Internet Technology Equipment (ITE), our Safety testing services ensure your devices meet national and international applicable Safety standards, giving you and your customers confidence in their performance and reliability.
Examples of Tests:
Depending on the type of product and its application, these are the most common tests that IT or Audio/Visual equipment might have to go through:
- Temperature Test (Thermal Testing or Operating Temperature Test)
- Enclosure Testing:
-
- Accessibility Probe Test
- Ingress Protection (IP) Testing (IP Rating per IEC 60529)
- Glow-Wire Flammability Test (Glow Wire Ignition Test per IEC 60695-2 series)
- Dielectric Strength Test
- Leakage Current Test (Touch Current and Protective Conductor Current Test)
- Voltage Rating Verification
- Mounting & Mechanical Stability Test
- Radiation & Laser Safety Test
- Abnormal Operation Tests (also called Single Fault Condition Testing)
About IEC 62368-1
The IEC 62368-1 standard is the next evolution when it comes to regulatory compliance for Audio/Visual (A/V) and Information Technology Equipment (ITE). Replacing the older 60065 and 60950-1 standards, it introduces a Hazard-Based Safety Engineering (HBSE) approach, shifting from rigid, prescriptive rules to a more flexible, risk-based methodology.
With 62368-1, manufacturers must rethink hazard mitigation at every stage—from design and construction to end-use—implementing safeguards tailored to different levels of potential risk. Hazards are categorized into three energy source levels, each requiring specific safety measures to ensure compliance.
This new, technology-independent approach gives manufacturers greater design flexibility while staying compliant. By moving away from the restrictive frameworks of 60065 and 60950-1, the HBSE methodology allows for simpler, more efficient designs, reducing costs associated with production, compliance, and the product life cycle.
The bottom line? Safer products, streamlined compliance, and lower costs.
Already Certified? Here’s What You Need to Know About 62368-1
If your product meets 60065 or 60950-1, does that mean it’s automatically compliant with 62368-1? Not necessarily.
The 62368-1 standard isn’t just a simple update—it’s a fundamental shift in how safety is evaluated. Unlike its predecessors, which followed a more rigid, prescriptive approach, 62368-1 uses a hazard-based methodology that assesses risks differently.
That means even if your product was previously certified under 60065 or 60950-1, you can’t assume compliance with 62368-1. A full design and component review is required to determine if any changes are needed to meet the new standard’s safety requirements.
Bottom line: If you haven’t reviewed your product under 62368-1, now’s the time. Let’s ensure your compliance before it impacts your market access.
HAZARDOUS LOCATIONS
IT/AV equipment used in potentially explosive environments, such as oil and gas facilities, underground mines, and gas stations, requires special attention when it comes to testing and certification to confirm that the equipment will not ignite flammable gas, liquid, vapor, or combustible dust. At LabTest Certification, we ensure your products meet the safety requirements for Hazardous Locations applications, using the IEC, UL, CSA, EN, BS 60079 standard series along with ordinary locations standards (North American market). From Classes/Division markings (Canada & U.S.A.) to new approach Zone markings (ATEX & IECEx), our services provide a One-Stop Solution for all your product compliance needs.
LabTest Certification is a recognized member of the IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx System).
ENVIRONMENTAL TESTING
As national and international standards evolve, environmental compliance is no longer optional—it’s a requirement across industries like Marine, Aviation, Transportation, and Military. With stricter regulations shaping product design and performance, manufacturers must adapt to meet these demands.
IEC 60068 series, MIL-STD-810, IP Testing to IEC 60529, including IP6K9K (steam clean at high-pressures) especially used in the automotive/trucking industries.
Examples of Tests:
ENSURE YOUR PRODUCTS MEET EMC COMPLIANCE
In today’s interconnected world, Electromagnetic Compatibility (EMC) compliance is critical to ensuring your electronic devices operate safely and reliably without causing or being affected by interference. Whether you’re launching IT, audio/visual, or multimedia equipment, LabTest Certification offers Pre-Compliance and Full-Compliance EMC testing to help you meet regulatory requirements for multiple global markets, including North America, Europe, the U.K., Australia, Mexico, Taiwan, Hong Kong, Vietnam, and more.
We test to industry-recognized EMC standards, including:
With our accredited testing services and expert guidance, you can avoid costly delays, reduce risk, and ensure smooth market access.
📌 Check out our full list of accreditations here: LabTest Accreditations
Radio & Wireless Testing
In addition to the main EMC standards, LabTest also offers testing for Radio and Wireless devices in compliance with a wide range of transmitter standards.
In most systems, smart manufacturers use pre-approved transmitter modules, such as WiFi or Bluetooth.
Even when using a pre-approved module, manufacturers must verify that it remains compliant with applicable standards. This typically involves testing parameters like Peak Transmitter Power and Transmitter Spurious Emissions, following FCC KDB 996369 D04 Module Integration Guide and ETSI EG 203 367.
If a product includes a transmitter, such as a WiFi module, it must also be tested for compliance with:
Skip the Lab – Get Certified Where You Work!
- Minimized Downtime & Faster Market Entry
- Cost-Effective Compliance Solution
- Customized Testing for Real-World Conditions
FAST & RELIABLE FIELD EVALUATIONS – GET APPROVED ONSITE!
When full product certification isn’t practical, Field Evaluations provide a quick, cost-effective alternative to ensure compliance with safety standards. LabTest Certification specializes in onsite evaluations for unapproved Electrical, Electronic, Hazardous Location (HazLoc), and Gas-Fired Equipment—whether at the manufacturing facility, point of installation, or distribution center.
Our Accredited Field Evaluation Services Include:
Special Inspections (for one-time approvals of limited production runs)
With LabTest’s expertise, industry accreditations, and fast turnaround times, you can meet regulatory requirements efficiently and keep your projects moving forward.
📌 Need an inspection? Contact us today!
PRELIMINARY DESIGN REVIEW
How Long Does a Preliminary Design Review (PDR) Take?
Once your project is activated, the timeline for a PDR can range from as little as 4 hours to up to 5 days, depending on the complexity of the product and applicable standards. This process includes a pre-evaluation to relevant standards and a detailed review of requirements and interpretations to help you navigate compliance efficiently.
What Do You Get?
At the conclusion of your Preliminary Design Review, you’ll receive a clear and comprehensive summary of findings, tailored to your needs. This may come in the form of:
✔ A formal report
✔ A detailed letter
✔ A concise email summary
Beyond the review, we provide ongoing technical support throughout your project.
Join our community and stay in the loop with LabTest!
Your data will not be shared with 3rd parties and only used to keep you informed on what’s new with LabTest and the industry.