LC Clients

• Pressure Swing Adsorption System
• Model No.: SILO
• Ratings:
  • Ex II 3 G Ex ec db h IIB+H2 T3 Gc
  • 400Vac, 1.5Amps, 50Hz, 3PH
  • Control: 24VDC, 0.5A

• EN IEC 60079-0:2018
• EN 60079-7:2015/A11:2024
• EN 60079-1:2014
• EN ISO 80079-36:2016
• EN ISO 80079-37:2016

• Cable glands for wiring installation shall be suitably-certified and shall maintain the minimum IP54 ingress protection of the enclosure.
• End users shall follow specific installation and operating instructions supplied by the manufacturer to prevent exceeding the heat dissipating limits for the desired temperature code for an operating ambient.
• Motor shall be supplied by an external VFD, model MCX91A-0010-5E3-4-T00/001, located in a non-hazardous area only. It is the end user’s responsibility to follow the instructions provided for connection of the VFD to the motor and to ensure all applicable requirements are met.
• Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure of this equipment may generate an ignition-capable level of electrostatic charge. Therefore, the equipment shall not be installed in a location where the external conditions are conducive to the build-up of electrostatic charge on such surfaces. In addition, the equipment shall only be cleaned with a damp cloth.
• Unused entry holes for the enclosure shall be fitted with suitable stopping plugs having an equipment certificate or having a component certificate subject to the confirmation by the end user/installer of the ingress protection rating and the permitted service temperature of the component.
• The end user is to ensure appropriate earthing upon installation.

General Note.:

• Project no.: 25-5630
• ATEX Test Report Cover: 11.03.25-5630-1
• ATEX CAT 3 Unit Verification Certificate no.: LC26ATEX25-5630-1X, Issue 0