CSA SPE-1000 is a Model Code for one-time approvals of General Electrical Products being installed in the field or still at the manufacturing facility, which don’t comply with the Canadian Electrical Code requirements. Also called “Special Inspection”, this type of approval must be performed by an Inspection Body accredited by the Standard Council of Canada (SCC), as per ISO 17020, such as LabTest Certification Inc.
Come funziona?
SPE-1000 applies to limited quantities, as little as one unit and a maximum of 500 units/model/year/manufacturer’s facility and is performed on a complete system. The Model Code addresses the construction, marcature, and test requirements that the equipment must meet before it can be labeled. The evaluation consists in an inspection of the product, components, and drawings and tests are performed (onsite or at the lab), as per the reference standard, to confirm compliance.
The product is then labeled with the “LC Special Inspections Label” and it can be sold in Canada. The labelling of each unit must be performed by a LabTest inspector. Lastly, local authorities will verify the correctness of the installation and electrical connection.
LabTest certificazione Inc. è riconosciuto dalla autorità avendo giurisdizione (Di AHJ) In tutto il Canada
Possiamo valutare presso i nostri laboratori di LabTest, la tua posizione o il punto di installazione.
This program is only valid and available for the Canadian market, as the USA don’t offer an equivalent program. “Special Inspections” are for limited quantities only and do not replace full certification. The inspections are only performed on a complete systems or subassemblies such as subunits, pannelli di controllo, ecc. It cannot be performed on a component such as motors, cavi, or similar components.
When to use CSA SPE-1000?
This program is beneficial if:
The product is custom-made
La certificazione non è pratica
The product is imported to Canada from markets whose regulations are different
You are modifying already listed products
You are testing the market for a product that you may not continue production for
You are product has been “Red Tagged”
Products within SPE-1000 scope
Industrial control panels, Automated manufacturing equipment, semiconductor fabrication, luminaires, switchboards, robotics, heating and cooling, generators, distribution systems, and any mobile equipment that has electrical components.
What tests are performed?
Sulla base della costruzione, one of the main and mandatory tests is the Dielectric Test, also known as “Megger Test”. For equipment rated 250 Vac or less, 1000 Vac Test voltage is applied to the product for one (1) minute, without a breakdown between live parts and exposed non -current carrying metal parts and between live parts and accessible extra low voltage secondary circuits.
Other tests that can be performed on the product are: Temperature test, Test di corrente di perdita, Strain Relief test, and Flame test.
Se l'unità è installata all'aperto, it will also need a Rain Test for the duration of 90 minuti.
For additional information or to book an SPE-1000, please contact LabTest Certification Inc. presso info@labtestcert.com or Call Us toll free at 1-855-346-0444.
The “Special Inspections” program is a quick and cost-effective service, perfect for limited production of products destined for Canada!
If your product has been rejected by the Canadian Authorities Having Jurisdiction, you can count on LabTest Certification Inc., your SCC accredited Inspection Body!
LabTest Additional Services
LabTest Additional Services
Unisciti alla nostra community e resta aggiornato con LabTest
I tuoi dati non saranno condivisi con terze parti e utilizzati solo per tenerti informato sulle novità di #8217 con LabTest e il settore.
Mettersi In contatto